Overclocking This motherboard is designed to support overclocking. Talk to a Technician Now! Chassis Intrusion The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened. Use of high performance defaults will tighten most timings to increase the system performance. To enable 4- or 6-channel audio operation, first connect 4 or 6 speakers to the appropriate audio connectors, and then select 4- or 6-channel audio setting in the software utility.

Uploader: Vudosar
Date Added: 9 August 2015
File Size: 5.28 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 61377
Price: Free* [*Free Regsitration Required]


A-9 Testing Each Speaker The InstallShield Wizard will begin automatically for installation. Power off and Check the Failed Drive: Enabled Enables the onboard Floppy controller. Then return to pin position. The items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. Out function when 4-Channel Mode for 6-Speaker Output is selected.

Each category includes none, one or more setup items. Using 4- or 6-Channel Audio Bios Setup Chapter msj.

K8TM-ILSR (MS-6741)

Click Finish to restart the system. The power will shut down automatically in two conditions: Our products are under continual improvement and we reserve the right to make changes without notice.

Last Drivers  ATI RADEON HD 3860 DRIVER

Contact the seller — opens in a new window ms motherboard tab and ,otherboard a shipping method to your location. By controllers and by device. You are covered by the eBay Money Back Ms motherboard if you receive an item that is not as described in the listing. Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions.

However, please make sure your components are able to tolerate such abnormal setting, while doing overclocking. This feature only protects the boot sector, not the whole hard disk.

Click on the Next button to proceed the installation in the welcoming window. Monitor function is available only if there is hardware monitoring mechanism onboard. Customer reviews There are no customer reviews yet. Select this function A – 1 If set to Setup, password prompt only occurs when you try to enter Setup. This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline.

Page 8ktm-ilsr 4-Channel Mode for 4-Speaker Output The audio jacks on the back panel always provide 2-channel k8tm-lisr audio output mzi, however these audio jacks can be transformed to 4- or 6- channel analog audio jacks by selecting the corresponding multi-channel operation from No.


MSI K8MM-ILSR User Manual

Pull the lever sideways away from the socket. There is a mechanism of this mainboard to protect it sm-6741 being damaged. It msk a 66MHz, bit channel for the graphics controller to directly access main memory. Posted on Mar 01, Be the first to answer. To use the feature, you need to define the burst length, which is the actual length of burst plus the starting address and allows internal address counter to properly generate the next memory location. Make sure to raise the lever up to a de- gree angle.

MSI K8TM-ILSR, Socket , AMD Motherboard | eBay

Got k88tm-ilsr, continue to print. Then click Next button to proceed the installation. If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper. If you have questions about this VAT ms, please contact the seller.

Testing the Connected Speakers