The CPU connects with the ASIC and memory by use of the system bus and performs jog management and sequence control of the whole engine. Enable printing of a black mark index at the top of each received fax page. Disassembly procedure Multi unit 1 Remove the screw and remove the multi upper cover. The voltage of 3. Takes synchronization between the lead edge and the rear edge of the paper. When the mirror base unit returns to the home position, the acquired value is displayed. Document transport path and basic composition.
|Date Added:||3 June 2007|
|File Size:||36.86 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Sharp FO-DC550 Fax Machine User Manual
Reverse roller section RSPF model only. Subscription auto-renews at the end of the term Learn more.
When, however, the setting is made to make higher contrast, Exp. The function can be disabled. ERR 3 Compare the scale image and the actual image. Cause Mirror unit abnormality Scanner wire disconnection Origin detection sensor abnormality Mirror motor harness abnormality Check Use TC to check the mirror reciprocating and operations.
DV bias check Note: When this test command is executed, the current adjustment value is displayed as the initial display.
Sharp FO-DC Laser Toner Cartridge and Printer Supplies at
Setting is made in binary input of N in ” bps x N” in the range of bps — bps. When the machine is booted.: ON Main charger grid control signal. Duplex motor section The print result is shifted to the opposite direction of the scan start position.
When test command is executed, the current adjustment value is displayed as the initial display. Adjusting the paper reverse position in memory for duplex copying. Also make certain the outlet is properly grounded.
Sharp FO DC550 – multifunction printer ( B/W )
The normal noise means that overlapped in the AC line or the output line. When the electrical resistance is reduced, positive charges on the aluminum layer are moved and neutralized with negative xc550 on the OPC layer.
Pickup unit 1 Remove the belt, the paper feed frame spring, and two harnesses. It is transported to the waste toner collecting section in the cleaning unit dc5550 the waste toner transport roller.
Send cancel without call-out The line is shut-off after sending the last page of scanned data. Setting is made in binary input by the increment of 10ms. In case of test dc50 of operation check, terminates the operations.
Main code 46 Sub code 01 02 Resolution for copy density adjustment dpi dpi Toner save mode 1 2 For selection of modes, use the copy mode select key. Scanner unit The scanner unit in the digital cd550 scans images. Valid only when two cassettes are installed.
Installing the TD cartridge 1 Open the bypass tray, and then open the side cover. Image loss on the right edge in OC main scan direction can be adjusted. Checking packed components and accessories Open the carton and check if the following components and accessories are included.
Set the default size of originals faxed from the document glass. An interruption command is entered with the co key. A confidential box number which is not registered is directed when receiving a confidential message. S – S Simplex to Simplex Shift width: Make sure that the paper is not torn, is free of dust, and has no wrinkles or curled edges.
Used to set whether the protocol monitor of the last communication is saved or dd550.