Over a Month Ago Time Zone: Current Temperatures Take II. Thus the bios can “see” the drives. The time now is Pressing Ctrl-F any way does not get you in either.

Uploader: Shakalkis
Date Added: 17 April 2015
File Size: 33.47 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22124
Price: Free* [*Free Regsitration Required]

You should have seen a hot key sequence before this or maybe after that says something to enter p4p800- config. Don’t forget it is easiest if you use a floppy to load the driver.

Standard SATA Operation on RAID Controller? (Asus P4PE Deluxe) – Ars Technica OpenForum

The time now is Thus the bios can “see” the drives. What else could I try? The old post was: Windows 7 Ultimate x Such rakd may not be accurate and they are to be used at your own risk. But when I boot the machine I see the same situation as the old post.

Asus P4PE Deluxe Intel Socket Motherboard Overview – CNET

To make sure they install properly go to device managed and uninstall the old FastTrak driver, reboot and when new hardware is found point to your downloaded driver there was no need to cut to disc Hope this p4;800-e. Is the Fasttrack Bios part of the Asus Bios or is it updated by another means? Originally Posted by blackduck Current Temperatures Take II. P4PE Deluxe home support page http: Would you use Snapchat filters on your dog?


Net is the opinions of its users.

The settings for RAID for the built into contoller main chipset drive controller are in the mboard’s bios Setup. This is about as good as it gets and if you read it, you will most likely be able to set up what you want to: Computer powers off in sleep mode If you want the operating system to be on the RAID array I did it successfully a couple of years ago.

Bios not installed, ASUS P4P800-E deluxe

Use Question Form such as ” Why? Pressing Ctrl-F any way does not get you in either. The issue is either you didn’t use the setup utility to assign drives or raid or there is an issue with the drives physically or electrically in it’s attachment to the raid array. I would backup and restore to an external drive to keep the data. Hi, Here is a copy of that thread from Clintfan.


To do this I have to use the Promise Fast Track Bios utillity to delete my existing array and create a new one. The Promise controller is the Fastrak controller.

Net and its accuracy. The conclusion of the expert in the old post was that the drives were dead.

This ancient technology is great isn’t it! I doubt the message no bios installed is correct for diag use. The information on Computing.

If at least one drive is detected connected to the Promise Fastrak controller and is are being detected correctly, you’ll see a line that indicates the drive s has have been detected, and if at least two drives or possibly at least one is are detected, then THAT’S when you’ll see the line that tells you what keys to press to access it’s RAID utility Ctrl-F in this case?

Copyright -Tech Support Forum.