You are now connected to your Temma Mount and can control it via wireless control through SkySafari 6 Pro. While idle the mount could track into a hazardous position. Sep 3, , This driver works with either alt-az mounts like a dobsonian or equatorial mounts. Then you can use whichever driver suits your needs.

Uploader: Mezizilkree
Date Added: 22 April 2017
File Size: 59.7 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53905
Price: Free* [*Free Regsitration Required]

It should also work with TheSky6 and TheSky5 but not all functionality will be present. Additional cable and relay boxes are no longer required as they were for previous Tak mounts.

The hand paddle attached to the mount still works when the mount is connected to the PC. Perhaps you are not unparking the mount within SGP… I downloaded the driver here so I can at least give a screenshot or two.

Astrophotography Equipment

You are welcome to visit and look around here, but you will not see the premium support sections until you are a DC-3 Dreams customer. Temma 2 and Temma 2 Jr. Average power consumption is under 1 Amp at 24V. Astro-Physics sells and EM adapter.

Focus Max would go off to focus and come back with sub 1 arc-min accuracy.

Connect with Taka Temma EM – Equipment Compatibility – Main Sequence Software

With a mount flip it was under 10 arc-min. To use go to your Telescope dialog and click, Connect, you should now be able to control your mount using that program. Again, it is hard to give a good reply without going off the board and trying some stuff. Make sure your mount is powered up before clicking connect and is in the Counterweight Down position, you will then get a dialog asking you to select a suitable star either East or Acsom of the Meridian, loosen the mount clamps and centre the star and click Sync, provided you are accurately Polar Aligned, that is it.


temna Please go to the Astro-Physics Driver web page for their driver and associated software. Contact us for a forum account if you wish to have pre-sales information. This is an ongoing project, so be sure to check the site for updates.

There are encoders built into the system, but these encoders are located on the worms so they only measure driven mount movements.

ASCOM Temma Telescope Driver (free) download Windows version

It also recognises the StarSense HC. To connect, go to the Telescope Menu click Link then Establish and you should be connected. Celestron Telescope Driver ProgId programmers only: The author provides a self-contained installer. For more information on this subject, please contact AEC. The Temma PC system relies on the polar alignment of the mount for goto accuracy. This Page Updated 9th April Pointing is relatively accurate and when it is not the case, ACP makes the job.

It is possible to use a USB to serial adapter to allow newer laptops to communicate with the Temma mounts.


Details on the revised Software Bisque Temma driver can be found here. Goto was always within 5 arc-min and typically within 2 arc-min. Larry, If you need some advices on the Temma driver, don’t hesitate. ascok

Next you will need the Telescope Driver, you can get that from here: I cannot show you this…as I have no mount connected to this computer. ASCOM includes drivers for a variety of telescopes and mounts.

Temma by Takahashi ASCOM Driver

Thanks for taking the time to post here for others. Thread Tools Show Printable Version. I ask that you don’t sell the driver or derivative products. This driver does NOT support Synta mounts.