Thefriction pad will be worn after a number of sheets are fed, and it need to be replaced. Changing displayed hours G MaintenanceIn the first paper feed section, the pressure between the paper rollers and the separator transports thepaper to second feed part. The installation instruction above takes Windows XP as an example. The following dialog box may appears: Press down the drum lock switch;3. Click Yes to continue the installation.

Uploader: Tygosho
Date Added: 5 November 2004
File Size: 53.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 31411
Price: Free* [*Free Regsitration Required]

Max. B4 Original & B4 Master Digital Duplicator (RD-3608)

Make sure to fix the screws. Press drum aointo switch and take out paper jammed;3. Sundries in Feed Part Press down the jog switch and take out the jam paper.

Clear the master manually, rotate drum to its stop position, and make sure the block in the groove;6. Press disposal master box switch, open that boxto max; 78 2. All of the indicatorare off Except save energy indicator light ;2.

Last Drivers  MHZ2160BH G2 DRIVER

Operation manual-RD-3608,4129

If the error remains, contact Service Dept. Rotate the master roll bracket, removethe old master roll. First remove the side rollers; take offthe screw on the main roller and thenremove the main roller.

Open the original paper receiving tray.

Thefriction pad will be worn after a number of aiinto are fed, and it need to be replaced. Disposal box full Please close the box.

ErrorPower Safeguard Turn off the power and turn it on akintp 10 seconds. I could be wrong here, if someone shows me differently, but I have researched this through Cat channels and, even with a factory password, I don’t think you can change the hour reading in the ECM. Press down the drum lock switch;3. Browse the path of the driver.

In case the installation fails please enter the printers in the control board, cancel RDPrinter1. Contact the Service Dept. Middle Paper JamPlease take out paper as below: Master Ejection ErrorPlease clear error as below.

Then Turn on the printer.

Message 1 of 3 2, Views. Plug the USB cable into the printer and the computer. Please do not touch paper cutting to avoid danger. Open drum lock switch ,take out drum;3. Press drum micro switch until warning stops;2.


Caterpillar – Changing displayed hours G – Online Community

Click Yes to continue installing the driver. Message 3 of 3 2, Views. Close disposal master box. The printing position is not adjustable during the printing process. Select Printer, then click Next: Or the box might be full, please remove the wasted master. Whether the machine is switched onWhether the machine is connceted to the power source Yes NoWhether the power is switched on Connect to the power source NoYes Switch on the powerContact theService Dept Akkinto the second option.

Best Regards, Al Hunt. Press any button to exit from save energy mode.